A new crankset and chainrings are an ideal place to save weight and impact the performance of your bike. With new chainrings you can change overall gearing to be easier, if you like, or replace worn rings to get many more miles out of your bike. The crankset itself can be upgraded to a lightweight model in order to save precious grams on a bike where every ounce counts. At Campus Cycles we carry a wide array of mountain or road cranksets and chainrings from Shimano, SRAM, Cannondale and other brands that will improve your bike’s ride.
• Square taper interface • Only includes left crank • 175mm length
- For chain and derailleur alignment - 20 per bag
This is a drive-side stop washer for your Surly Mr. Whirly Crank. It ensures you're properly spaced out down there.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Replacement crank bolt for RaceFace Cinch cranks.
Race Face steel crank bolt/puller for 2008 and earlier Evolve XC cranks.
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Cable stop for Metropolis Patterson geared cranksets.
- Service parts for E-13 chainguides - Includes dual step roller, bearing, axle and spacer
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face Crank Boots • Fits from Race Face: Turbine Cinch, Turbine, Atlas, Evolve, and Ride Cranks • Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks • Fits from Shimano: XT, SLX, Deore Cranks
• Compatible with mini hex chainrings
Crank bolt for WeThePeople Awake crank.
Replacement crank bolt for WeThePeople's Legacy crank.
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage…
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.